Tuning Channels; Tuning Channels Using The Channel Browser - Toshiba 26HL47 Owner's Manual

To clear the input labels:
1 Press M~U and open the
Preferences
menu.
2
Highlight
Input Labeling
and press
@.
3
Highlight
Reset
and press @.
4
Press .... or
~
to select the desired label for that input
source. If a particular input is not used, you can select
Hide
as the label, which will cause that input to be
"grayed out" in the Input Selection screen and skipped
over when you press
~
on the remote control.
5
To save the new input labels, highlight
Done
and
press@.
To revert to the factory default labels, highlight
Reset
andpress@.
To add a favorite channeVinput:
1
Tune to the channel or input.
2
Press and hold
FAV
BR~5ER
for 3 seconds.
Note: Additions are added to the beginning of the Favorites list
on the left side of the Channel Browser™.
The Favorites Browser allows you to quickly set up a favorite
channels/inputs list that is integrated into the Channel Browser™.
1
Press FAVB~ER to open the Favorites browser list.
2
Highlight the channel or input to delete by pressing
; ....
Ort;~.
3
Press and hold @ for 3 seconds. The channeVinput will
be removed from the Favorites list.
To delete a favorite channeVinput:
Favorites Browser
Tuning channels
The Channel Browser™ provides an easy navigation interface
for all your channels and inputs. This feature allows you to:
• Navigate the contents of all of your inputs.
• Keep a list of your favorite channels (see "Favorites
Browser," below).
• Keep a history of the last 32 channels or inputs viewed.
• Quickly surf and tune your recently viewed channels/inputs
from the Channel Browser™ History List (illustrated on the
next page).
• Surf via Browse mode (to immediately tune channels as you
highlight them in the Channel Browser™) or Select mode (to
surf over channels in the Channel Browser™ before you
select one to tune).
• Quickly change inputs from the Inputs List.
Tuning channels using the
Channel Browser™
(j) .
(j) I
CD
to Select • N.YlgeIe
10
ANT
o
VCR
f)
Cable
e
Video Recorder
e
ColorSlream H02 (Hidden)
o
DTV
o
Satellite/OSS
G
DVD
(j)PC
Input Selection screen with
all inputs labeled except input 4,
which has been hidden.
(j) • (j) I
CD
to Select Navigate
10
ANT
o
Video 1
f) Video 2
e
ColorStream HDl
e
ColorSlream H02
0HDMIl
o
HDMI2
G
HDMI3
(j)PC
Input Selection screen with
no inputs labeled.
Input labeling example:
The screen below left shows the default
Input Selection
screen (with none of the inputs labeled as a specific device).
The screen below right is an example of how you could label
the inputs if you connected a VCR to VIDEO I, Cable TV to
VIDEO 2, a video recorder to ColorStream HDI, a DTV set-
top box to HDMI I, a satellitelDSS set-top box to HDMI 2, and
a DVD player to HDMI 3. Also note that the ColorStream HD2
input is labeled "Hidden," which means that input will be
skipped over when
~
is pressed.
To set up the Channel Browser™:
1
Press M~U and open the
Preferences
menu.
2
Highlight
Channel Browser Setup
and press @.
3
Press. to highlight
Navigation,
and then press .... or ~
to select either
Browse Mode
or
Select Mode.
I
36