Chapter 2: Connecting Your Tv; Overview Of Cable Types; About The Connection Illustrations - Toshiba 26HL47 Owner's Manual

Overview of cable types
Cables can be purchased from most stores that sell audio/video
devices. Before purchasing any cables, be sure of connector
types required by your devices and the length of each cable.
Coaxial (F-type) cable
ecIDl...- - - -
Coaxial (F-type) cable is used for connecting your antenna,
cable TV service, and/or cable converter box to the ANT input
on your TV.
Standard AN cables (red/white/yellow)
I~~---­
~~
Standard NY cables (composite video) usually come in sets of
three, and are for use with video devices with analog audio and
composite video output. These cables (and the related inputs
on your TV) are typically color-coded according to use: yellow
for video, red for stereo right audio, and white for stereo left
(or mono) audio.
S-video cable
o
[[II]IDm-----
S-video cable is for use with video devices with S-video
output. Separate audio cables are required for a complete
connection.
Note: An S-video cable provides better picture performance
than
a
composite video cable. If you connect an S-video cable,
be sure to disconnect the standard (composite) video cable or
the picture performance will be unacceptable.
Component video cables (red/greenlblue)
~::7
~ ._~-----
~
Component video cables come in sets of three and are for use
with video devices with component video output.
(ColorStream® is Toshiba's brand of component video.) These
cables are typically color-coded red, green, and blue. Separate
audio cables are required for a complete connection.
Note: Component video cables provide better picture
performance than
a
standard (composite) video or S-video
cable.
I
12
HOMr
M
cable (with HOMI Logo" HOm.")
HDMI (High-Definition Multimedia Interface) cable is for use
with devices with an HDMI output. An HDMI cable delivers
digital audio and video in its native format. This cable carries
both video and audio information; therefore, separate audio
cables are not required for a complete HDMI device
connection
(~
page 17 and page 19).
Note: HOMI cable provides better picture performance than
a
standard (composite) video or S-video cable.
Optical audio cable
[Q] ct:t::J=1
Optical audio cable is for connecting receivers with Dolby
Digital or PCM (pulse-code modulation) optical audio input to
the TV's DIGITAL AUDIO OUT terminal
(~page
18).
Analog ROB (1S-pin) computer cable
~~=
~~
Analog RGB (15-pin) computer cable is for connecting a PC to
the TV's PC IN terminal
(~page
19).
About the connection illustrations
You can connect different types and brands of devices to your
TV in several different configurations. The connection
illustrations in this manual are representative of typical device
connections only. The input/output terminals on your devices
may differ from those illustrated herein. For details on
connecting and using your specific devices, refer to each
device's owner's manual.