Connecting A Vcr And Antenna Or Cable Tv (No Cable Box) - Toshiba 26AV500U Owner's Manual

~.
.
_
~'-::
"
Connecting a VCR and antenna or Cable TV (no Cable box)
IJ
o
t
Stereo
VCR
You will need:
• coaxial cables
• standard AIV cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. 00 not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
- If you have
a
mono VCR, connect UMONO on the TV
to your VCR's audio out terminal using the white audio
cable only
To view the antenna or Cable signal:
Select the ANT video input source on the TV. *
To view the VCR:
Tum ON the VCR. Select the VIDEO 1 video input source on
the TV.*
*
To select the video input source, press INPUT on the remote
control
(~
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and criminal
liability.
13
I