Connecting A Vcr And Antenna Or Cable Tv (No Cable Box) - Toshiba 22AV500U Owner's Manual

'Challtei 2: Connecting your TV
Connecting a VCR and antenna or Cable TV (no Cable box)
From
Cable
TV
or antenna
TV back panel
LIMONO VI DEO
@ @
_ _ fVIDI
~
ff
~
DIGITAL
ANT !CABLE AUDIO OUT
You will need:
• coaxial cables
• standard AN cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable, 00 not connect both types of
video cable to VIDEO IN at the same time or the picture
performance will be unacceptable,
- If you have
a
mono VCR, connect UMONO on the TV
to your VCR's audio out terminal using the white audio
cable only
To view the antenna or Cable signal:
Select the ANT/CABLE video input source on the TV.
*
To view the VCR:
Turn ON the VCR. Select the VIDEO video input source on
the TV.*
*
To select the video input source, press
INPUT
on the remote control
(1& page 21), To program the TV remote control to operate other
devices, see Chapter 3,
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability,
13