Connecting Multiple External Scsi Devices - LSI LSI20320 User Manual

2-10
Step 3. Connect any additional SCSI devices to one another with
shielded external SCSI cables. You need a separate SCSI
cable for each additional device.
Figure 2.12
devices.
Figure 2.12 Connecting Multiple External SCSI Devices
Enable termination
on the device at the
end of the bus.
Step 4. Be sure that termination is enabled only on the last external
SCSI device, as
"Terminating the SCSI Bus," on page 2-11
bus termination.
Detailed Host Adapter Installation
Version 2.3 Copyright © 2002–2004, 2006 by LSI Logic Corporation. All rights reserved.
shows how to connect multiple external SCSI
Figure 2.12 shows. Refer to
Disable
termination on all
devices not at the
end of the bus.
Host Adapter
Automatically
Terminated
Section 2.4,
for details on SCSI