Inserting The Host Adapter - LSI LSI20320 User Manual

2.1.2 Inserting the Host Adapter

Follow these steps to install your Ultra320 SCSI host adapter in the
PC mainboard.
Step 1. Remove the blank bracket panel on the back of the computer that
is aligned with the PCI/PCI-X/PCI Express slot you have selected.
Save the bracket screw.
Step 2. Carefully insert the edge connector into the PCI Express slot.
Caution: Apply even pressure to both top corners of the board while
inserting it, as shown in
Caution: Do not apply pressure to the center of the board, or to any
add-on cards that are connected to the host bus adapter.
Figure 2.2

Inserting the Host Adapter

Bracket Screw
Press Here
Edge of
Motherboard
Installing Your Ultra320 SCSI Host Adapter
Version 2.3 Copyright © 2002–2004, 2006 by LSI Logic Corporation. All rights reserved.
Figure 2.2.
Press Here
PCI Connectors
PCI Express
Connector x16
PCI Express
Connector x4
2-3