Press_Pwr_Btn Runtime Errors; Hold_Pwr_Btn; Hold_Pwr_Btn Parameters; Hold_Pwr_Btn Runtime Errors - HP Integrated Lights-Out User Manual

PRESS_PWR_BTN Runtime Errors

The possible error messages include:

HOLD_PWR_BTN

This HOLD_PWR_BTN command is used to hold the server power button. For
this command to parse correctly, the HOLD_PWR_BTN command must appear
within a SERVER_INFO command block, and SERVER_INFO MODE must be
set to write. The user must have the virtual power and reset privilege to execute
this command.
Example:

HOLD_PWR_BTN Parameters

There are no parameters for this command.

HOLD_PWR_BTN Runtime Errors

The possible error messages include:
Server information is open for read-only access. Write access is required for
this operation.
User does not have correct privilege for action. RESET_SERVER_PRIV
required.
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<SERVER_INFO MODE="write">
<HOLD_PWR_BTN/>
</SERVER_INFO>
</LOGIN>
</RIBCL>
Server information is open for read-only access. Write access is required for
this operation.
Remote Insight Command Language 321