Hponcfg Requirements; Hponcfg Installation And Usage - HP Integrated Lights-Out User Manual

262 User Guide Integrated Lights-Out

HPONCFG Requirements

HPONCFG requires that the appropriate management interface driver be
installed. The drivers are provided with SmartStart or can be downloaded from
the HP website
out/us/index.html).
HPONCFG is supported on the following firmware:

HPONCFG Installation and Usage

Before installing and running HPONCFG, be sure the appropriate management
interface driver is installed. Refer to the "HPONCFG Requirements (on page
262)" section. For both iLO-based servers and RILOE II-based servers,
sm2user.dll must be loaded on the server. This file is automatically loaded along
with the HP Insight Management Agents.
During execution, HPONCFG will display an error message if the sm2user.dll
file cannot be found. This file can be installed separately from the component HP
Insight Management Agents for Windows® 2000 or Windows® Server 2003,
component number CP003732, which can be downloaded as a part of the
ProLiant Support Pack on the HP website
(http://h18004.www1.hp.com/support/files/server/us/download/18416.html).
After downloading the ProLiant Support Pack, extract the contents to a
temporary directory. In the temporary directory, locate CP003732.exe. Extract
the contents of CP003732.exe to a temporary directory. In the temporary
directory, locate the subdirectory cqmgserv. The sm2user.dll file can be found in
this subdirectory. Copy sm2user.dll to the Winnt\system32\ directory on the
server.
Red Hat Linux 8.0
SLES 7
United-Linux 1.0
(http://h18004.www1.hp.com/support/files/lights-
iLO 1.41 or later
RILOE II 1.13 or later