Mod_Global_Settings Runtime Errors; Get_Snmp_Im_Settings; Get_Snmp_Im_Settings Parameters; Get_Snmp_Im_Settings Runtime Errors - HP Integrated Lights-Out User Manual

298 User Guide Integrated Lights-Out

MOD_GLOBAL_SETTINGS Runtime Errors

The possible MOD_GLOBAL_SETTINGS error messages include:

GET_SNMP_IM_SETTINGS

The GET_SNMP_IM_SETTINGS command requests the respective iLO SNMP
IM settings. For this command to parse correctly, the
GET_SNMP_IM_SETTINGS command must appear within a RIB_INFO
command block, and RIB_INFO MODE can be set to read or write.

GET_SNMP_IM_SETTINGS Parameters

None

GET_SNMP_IM_SETTINGS Runtime Errors

None

GET_SNMP_IM_SETTINGS Return Messages

A possible GET_SNMP_IM_SETTINGS return message is:
3—38,400 bps
4—57,600 bps
5—115,200 bps
RIB information is open for read-only access. Write access is required for
this operation.
User does not have correct privilege for action. CONFIG_ILO_PRIV
required.
Unrecognized keyboard model.
<GET_SNMP_IM_SETTINGS>
<SNMP_ADDRESS_1 VALUE="192.168.125.121"/>