HP Integrated Lights-Out User Manual page 132

132 User Guide Integrated Lights-Out
The following commands display help messages :
help
?
Entering help or ? displays all the supported commands. Entering
<command help/?> or <help/? command> displays the help
message specific to that command.
Power
The power command is used to change the power state of the server and is
limited to users with the Power and Reset privilege.
power displays the current server power state
power on turns the server on
power off turns the server off
power reset resets the server (server power off followed by server
power on)
power warm warm boots the server
UID
The UID command is used to change the state of the Unit-ID light on the
server.
uid displays the current Unit-ID state on the server.
uid on turns the Unit-ID light on.
uid off turns the Unit-ID light off.
NMI
The NMI command is used to generate and send an NMI to the server and is
limited to users with the Power and Reset privilege.
Remcons
The remcons command starts a Remote Console session and is limited to
users with the Remote Console privilege. Only a text based remote console is
supported, similar to a telnet session. When in Remote Console session, enter
<ESC>( to return to the CLI.