Removing The Base Grille; Changing The Light Bulbs - Whirlpool Freezer Refrigerator Use And Care Manual

Removing the base grille
To remove the grille:
1.
Open refrigerator door.
2. Pull base grille forward to release the support
tabs from the metal clips.
3.
Do not remove Tech Sheet
fastened behind
the grille.
To replace the grille:
1.
Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 19.
Condenser
Changing the light bulbs
Electrical Shock Hazard
Unplug the refrigerator before removing
a light bulb.
Failure to do so can result in death or
electrical shock.
To change the refrigerator light:
1.
Unplug the refrigerator.
2. Reach behind the Control Panel to remove bulb.
3. Replace with a 60-watt appliance bulb.
4. Plug in the refrigerator.
To replace the freezer light:
1.
Unplug the refrigerator.
2. Grasp the top and bottom of the light shield.
3. Squeeze and pull light shield out.
4. Replace with a 25watt appliance bulb.
5. Snap light shield into place.
6. Plug in the refrigerator.
NOTE:
Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace a bulb with one
of the same size and shape.
17