Steam Mop; Care And Storage Of Your Steam Mop; Care Of Your Steam Mop - Shark SE200 series Owner's Manual

Care of Your Steam Mop

fig. 1
AFTER USE AND STORAGE
1 W hen you have finished using the
Steam Mop, press the STEAM button
to stop the unit from steaming. The
LED light will blink BLUE. Unplug the
cord from the outlet and place the
mop into the upright position. (fig. 1)
Let the unit cool for 2-3 minutes.
2 C arefully pull the micro-fiber cleaning
pad from steam mop. (fig. 2) Wash
the pad if necessary (for washing
instructions see page 8).
3 E mpty the water tank before storage.
Remove the water tank cap and
empty the tank over a sink. Replace
the water cap.
fig. 2
4 T o store the cooled Shark
Mop, hang on a large hook. (fig. 3)
N OTE: If you want to store the Steam
Mop standing upright, make sure it
is leaning against a wall for added
support and safety. Always store your
Shark
Steam Mop with the micro-
®
fiber cleaning pad removed. Store
away from children and high traffic
areas.
www.sharkclean.com
fig. 3
Steam
®
7