Quick Start; Assemble; Fill - Shark SE200 series Owner's Manual

Quick Start

a
b
fig. 1

ASSEMBLE

1 Fit together the backsaver
handle (a) and lower pole (b).
Insert the assembled pole into
the top of the mop as shown.
(fig. 1)
2 Place the micro-fiber cleaning
pad underneath the mop head,
with quick fastener strips facing
up. Simply press the mop to the
pad to attach it. (fig. 2)
TOLL FREE: 1-800-798-7398
fig. 2
fig. 3

FILL

3 Before plugging in the mop,
remove the cap to fill the water
tank. Use the filling flask and
funnel to fill the tank with water
to the "MAX" line. Replace the
water tank cap. (fig. 3)