Getting Started - Shark SE200 series Owner's Manual

Getting Started

When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark
Mop.
A B
E
D
F
A
Backsaver handle
B Lower Pole
C Steam Mop
D
2 All-Purpose Cleaning Pads
E Filling Flask
F
Funnel
G Steam Button
2 TOLL FREE: 1-800-798-7398
Steam
®
fig. 3
C G
fig. 1
ASSEMBLY
1 R emove all the parts from the
package. Verify all the listed parts
are included.
2 I nsert the lower pole into the
Backsaver handle as shown. (fig. 1)
3 I nsert the assembled pole into the
base of the steam mop. Gently push
down on the pole until you hear it
click into place. (fig 2)
fig. 2