When an Additional IDE
Drive is installed
4 The HP Setup Program
After Installing an IDE Drive
After Installing an IDE Drive
After installing an IDE drive you will need to run the Setup program to
confirm that the drive has been detected by the PC.
1 Switch on the PC.
2 When
F2=Setup
3 From the "Configuration" menu, choose "Hard disk drive".
4 Select the disk you have just installed.
5 Select Auto in the Type field.
6 Select Autotype fixed disk and press
7 Press
to save your choice and exit Setup.
Refer to the operating system documentation for information about
formatting a drive and installing the operating system.
64
English
is displayed, press
to run the Setup program.