HP 2240 Owner's Manual page 238

Memory Information Sample 2
The following sample shows the memory information when memory
modules are not properly installed and configured. In this sample the
memory module in memory slot 1A is missing.
MEMORY INFORMATION
WARNING: Memory has been reconfigured due to a
physical change or because the
Page Deallocation Table (PDT) was cleared.
This is for information only. No action is re-
quired.
MEMORY STATUS TABLE
Slot Size(a+b)
–––– –––––––––
0a/b
1a/b
2a/b 128MB
–––––––––
TOTAL 192MB
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC SMC Status Bank Bank Status Size Slot
––– ––––– ––– –––––––––– –––– ––––––––––
0x00000000 0
Group 0 interleaved
BAD MEMORY TABLE
Status
––––––
64MB Configured
??MB SIMM not seated properly.
Configured
0 Configured 1
0 Configured 3
1 Configured 1
2 ways over 3 banks
–––– ––––
Configured 64MB 2a/b
Configured 64MB 0a/b
Configured 64MB 2a/b
D-27