Installation and Operation, cont'd
•
•
N
Loop configuration example
The illustration on the following page is an example of daisy
chaining using a loop configuration.
VSW 2VGA A • Installation and Operation
2-16
Configure the jumpers on each VSW 2VGA A according to
the following example.
The VSW I AAP is configured for a loop configuration by
default.
In a loop configuration, the "show me" feature can be used
without a VSW I AAP control panel. Select Input 1 using
either the front panel toggle switch (see item
Panel
Features") or the rear panel contact closure control
(see item
e
in "Rear Panel Features") to issue the "show
me" control signal.
in
"Front
c