Bios Disabled Error Message; Drive Configuration Changes Error Message; Adapter At Baseport Not Responding Error Message - Dell PowerEdge H730P User Manual

permanently discarded. Press 'X' to acknowledge and permanently
destroy the cached data.
Probable The controller preserves the dirty cache from a virtual disk if the disk becomes
Cause: offline or is deleted because of missing physical disks. This message indicates that
some configured disks were removed. If the disks were not removed, they are no
longer accessible. The SAS cables for your system might be improperly connected.
Corrective Check the cable connections and fix any problems. Restart the system. Use the
Action: <Ctrl> <R> utility to import the virtual disk or discard the preserved cache. For the
steps to manage preserved cache, see

BIOS Disabled Error Message

Error Message:
BIOS Disabled. No Logical Drives Handled by BIOS.
Probable This warning message is displayed after you disable the ROM option in the
Cause: configuration utility. When the ROM option is disabled, the BIOS cannot boot to Int
13h and cannot provide the ability to boot from the virtual disk. Int 13h is an
interrupt signal that supports numerous commands that are sent to the BIOS and
then passed to the physical disk. The commands include actions you can perform
with a physical disk, such as reading, writing, and formatting.
Corrective Enable the ROM option.
Action:

Drive Configuration Changes Error Message

Error Message:
Entering the configuration utility in this state will result in
drive configuration changes. Press 'Y' to continue loading the
configuration utility or please power off your system and check
your cables to ensure all disks are present and reboot.
Probable The message is displayed after another BIOS warning indicating there are problems
Cause: with previously configured disks and you have chosen to accept any changes and
continue. The SAS cables for your system might be improperly connected.
Corrective Check the cable connections and fix any problems before restarting the system. If
Action: there are no cable problems, press any key or <Y> to continue.

Adapter At Baseport Not Responding Error Message

Error Message:
Adapter at Baseport xxxx is not responding, where xxxx is the
baseport of the controller.
Corrective Contact Dell Technical Support.
Action:
Managing The Preserved Cache .
73