Enabling Boot Support For A Bios-Enabled Controller; Enabling Bios Stop On Error; Disabling Bios Stop On Error; Enabling Auto Import - Dell PowerEdge H730P User Manual

Enabling Boot Support For A BIOS-Enabled Controller

1. Press <Ctrl> <N> to access the Ctrl Mgmt menu screen.
2. Press <Tab> to move the cursor to the Select Boot Device in the Settings box.
3. Press the down-arrow key to display a list of virtual disks.
4. Use the down-arrow key to highlight a virtual disk.
5. Press <Enter> to select the disk.
6. Press <Tab> to move the cursor to the Apply button, and then press <Enter> to apply the selection.
Boot support is enabled for the selected controller.

Enabling BIOS Stop On Error

BIOS stop on error is used to stop the system from booting if there are BIOS errors. Perform the following
steps to Enable BIOS Stop on Error.
1. Press <Ctrl> <N> to access the Ctrl Mgmt menu screen.
2. Press <Tab> to move the cursor to Enable BIOS Stop on Error in the Settings box.
3. Press the spacebar to select Enable BIOS Stop on Error.
An X is displayed beside Enable BIOS Stop on Error.
4. Press <Tab> to move the cursor to the Apply button, and then press <Enter> to apply the selection.
The controller BIOS is enabled.

Disabling BIOS Stop On Error

To disable BIOS stop on error:
1. Use the spacebar to de-select Enable BIOS Stop On Error.
2. Select Apply and press <Enter>.
The BIOS Stop On Error is disabled.

Enabling Auto Import

If there is a native configuration present on the controller, the option Enable Auto Import automatically
imports every online foreign configuration during boot without having the need to access the BIOS
Configuration Utility (<Ctrl> <R>).
NOTE: The controller automatically imports every optimal and degraded foreign configuration
without enabling the feature if there is no native configuration on the controller.
To enable auto import:
1. Press <Ctrl> <N> to access the Ctrl Mgmt menu screen.
2. Press <Tab> to move the cursor to Enable Auto Import in the Settings box.
3. Press the spacebar to select Enable Auto Import.
An X is displayed beside Enable Auto Import.
4. Press <Tab> to move the cursor to the Apply button, and then press <Enter> to apply selection.
The auto import is enabled.
61