Disabling Auto Import; Restoring Factory Default Settings; Uefi Raid Configuration Utility; Entering The Uefi Raid Configuration Utility - Dell PowerEdge H730P User Manual

Disabling Auto Import

To disable auto import:
1. Use the spacebar to de-select Enable Auto Import.
2. Select Apply and press <Enter>.
The auto import is disabled.

Restoring Factory Default Settings

You can use the Ctrl Mgmt menu screen to restore the default settings for the options in the Settings
box. The settings are Enable Controller BIOS, Enable BIOS Stop on Error, and Enable Auto Import.
Perform the following steps to restore default settings:
1. Press <Ctrl> <N> to access the Ctrl Mgmt menu screen.
2. Press <Tab> to move the cursor to the Settings box.
3. Use the spacebar to de-select the settings for the options in the Settings box.
4. Press <Tab> to move the cursor to the Factory Default box, and press <Alt>, <Enter>, or the
spacebar.
A dialog box is displayed for you to confirm your choice.
5. Select Ok and press <Enter>.
The defaults are automatically selected for the controller settings and are displayed in Settings.

UEFI RAID Configuration Utility

The UEFI RAID Configuration Utility is a storage management application integrated into the System
BIOS that can be used to configure and manage RAID disk groups, virtual disks, and physical disks. This
utility is independent of the operating system.
NOTE: Use the UEFI RAID Configuration Utility for initial setup and disaster recovery. Certain
advanced features are also offered in the utility.

Entering The UEFI RAID Configuration Utility

To enter the UEFI RAID Configuration utility:
1. Turn on the system.
2. During startup, press <F2> to enter the System Setup.
3. From System Setup main menu, enter Device Settings.
Device Settings lists all the RAID controllers in the system.
Use the arrow keys or mouse to select the RAID controller you want to configure/mange and press
<Enter> or click on the mouse to access the management menus for the controller.
NOTE: The help information for all the options within the UEFI RAID Configuration Utility can
be viewed by clicking on Help at the top right-hand corner of the browser screen. Help
information for individual option menus can also be viewed by scrolling down on each option.
NOTE: Some of the options within the UEFI RAID Configuration Utility are not present if the
controller does not support the corresponding feature. Options may also be grayed out if the
feature is supported in existing configuration.
62