Table of Contents
Advertisement
ANALOG OUTPUT (if applicable)
Signal type:
Signal level:
Function:
Linearity:
Load Regulation:
Line Regulation:
Step Response Time:
ALARM OUTPUTS (if applicable)
2 Form "C" on/off relays. Configurable for latched and unlatched by software.
Max current:
Max voltage:
ISOLATED ANALOG OUTPUT (TB5, if applicable)
Same as non-isolated analog output except isolated to 1000 Vdc.
Signal Type:
Signal Level:
Function:
Linearity:
Step Response Time:
Only one analog output is available on each unit and it must be factory installed.
Current or voltage
Current: 10 V max compliance at 20 mA output
Voltage: 20 mA max for 0-10 V output
May be assigned to a display range or proportional
control output with setpoint #1 when used as a
control output.
0.2%
1.1%
0.02% /V ac
2 - 3 seconds to 99% of the final value
5 AMPS, resistive load.
250 V ac or 30 V dc
Current or voltage
Current: 10 V max compliance at 20 mA output
Voltage: 20 mA max for 0-10 V output
May be assigned to a display range or proportional
control output with setpoint #1 when used as a
control output.
0.2%
2 - 3 seconds to 99% of the final value
51
Advertisement
Table of Contents
