Install The Motherboard - ECS Motherboard User Manual

Install the Motherboard

Install the motherboard in a system chassis (case). The board is
an ATX size motherboard. You can install this motherboard in an
ATX case. Make sure your case has an I/O cover plate matching
the ports on this motherboard.
Install the motherboard in a case. Follow the case manufacturer's
instructions to use the hardware and internal mounting points on
the chassis.
SYSTEM_FAN2
Connect the power connector from the power supply to the
PWR2 connector on the motherboard. PWR1 is standard 4-pin
ATX power connector.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the SYSTEM_FAN2 fan power
connector on the motherboard.
Connect the case switches and indicator LEDs to the PANEL1
header.
Chapter 2: Motherboard Installation
PWR1
PWR2
PANEL1
1
15