PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the
PCI bus and those utilizing the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Primary Graphics Adapter
Allocate IRQ to PCI VGA
PCI IDE BusMaster
: Move
Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the PCI or
the AGP bus. The default AGP setting still lets the onboard
display work and allows the use of a second display card installed
in an AGP slot.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We
recommend you to leave this item at the default value.
Motherboard User's Guide
PCI / Plug and Play Setup
AGP
Yes
Disabled
F9: Optimized Defaults
33
Help Item
Options
PCI
AGP