Standard Cmos Setup Page - ECS Motherboard User Manual

Motherboard User's Guide

Standard CMOS Setup Page

This page displays a table of items defining basic information
about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
System Time
System Date
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Floppy Drive A
Floppy Drive B
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help
Date & Time
These items set up system date and time.
IDE Pri Master/Pri Slave/Sec Master/Sec Slave
Use these items to configure devices connected to the Primary
and Secondary IDE channels. To configure an IDE hard disk
drive, choose Auto. If the Auto setting fails to find a hard disk
drive, set it to User, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-ROM drive,
select the setting CDROM. If you have an ATAPI device with
removable media (e.g. a ZIP drive or an LS-120), select
Floptical.
Floppy Drive A/B
These items set up size and capacity of the floppy diskette
drive(s) installed in the system.
Standard CMOS Setup
00:00:12
Mon 04/05/2004
Use [Enter], [TAB] or
Not Detected
[SHIFT-TAB] to select a
Not Detected
field.
Not Detected
Use [+] or [-] to configure
Not Detected
system Time.
1.44 MB 31/2"
Disabled
F9: Optimized Defaults
26
Help Item