Jumper Settings - ECS Motherboard User Manual

Motherboard User's Guide

Jumper Settings

Connecting two pins with a jumper cap is SHORT; removing a
jumper cap from these pins, OPEN.
LJP1
JP26: Clear CMOS Jumper
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your mainboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the motherboard and then move the jumper cap into the CLEAR
setting for a few seconds.
Function
Clear CMOS Short Pins 1-2
Normal
LJP1: GIGA LAN Function Jumper
Use this jumper to Enable/Disable Giga LAN function.
Function
Disable
Enable
JP26
Jumper Setting
Short Pins 2-3
Jumper Setting
Pins 1-2
Pins 2-3
14