I/O Ports - ECS Motherboard User Manual

SYSTEM_FAN2
JP26
SPK1
PCI 1-5
SIR1
LJP1
SPDIFO1
CD1
AUDIO1
Card_Reader
CPU_FAN
CNR1
AGP1

I/O Ports

The illustration below shows a side view of the built-in I/O ports
on the motherboard.
Parallel Port (PRN)
PS/2 Mouse
Serial Port
PS/2 Keyboard
COM1
Use the upper PS/2 port to connect a PS/2
PS/2 Mouse
pointing device.
Use the lower PS/2 port to connect a PS/2
PS/2 Keyboard
keyboard.
Use the Parallel port to connect printers or
Parallel Port (PRN)
other parallel communications devices.
Use the COM port to connect serial devices
COM1
such as mice or fax/modems. COM1 is
identified by the system as COM1.
Connect an RJ-45 jack to the LAN port to
LAN Port (optional)
connect your computer to the Network.
Use the USB ports to connect USB devices.
USB Ports
Use the three audio ports to connect audio
devices. The first jack is for stereo Line-In
Audio Ports
signal. The second jack is for stereo Line-Out
signal. The third jack is for Microphone.
Chapter 2: Motherboard Installation
System Fan connector
Clear CMOS jumper
Speaker header
32-bit PCI slots
SIR header
Giga LAN Function jumper
SPDIF Out header
Analog Audio header
Front Panel Audio header
Card_Reader header
CPU Fan connector
Communication Networking Riser slot
One Accelerated Graphics Port slot
LAN
Port
USB
USB
Ports
Ports
9
Line-In
Line-Out
Microphone