Power Management Setup Page - ECS Motherboard User Manual

Power Management Setup Page

This page sets some parameters for system power management
operation.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
ACPI Aware O/S
Power Management
Suspend Mode
Suspend Time Out
Resume On RTC Alarm
Keyboard Power On
LAN/Ring Power On
: Move
F1: General Help
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Power
management Interface). Use this item to enable or disable the
ACPI feature.
Power Management
Use this item to enable or disable a power management scheme.
If you enable power management, you can use the items below to
set the power management operation. Both APM and ACPI are
supported.
Suspend Mode
This item selects the status S1(Stop Clock) or S3(Suspend to
RAM) when the system enters the power-saving Suspend mode.
Motherboard User's Guide
Power Management Setup
Yes
Enabled
S1
Disabled
Disabled
Disabled
Disabled
Enter: Select +/-/: Value F10: Save Esc: Exit
F9: Optimized Defaults
31
Help Item
Enable / Disable
ACPI support for
Operating System.
Enable: If OS
supports ACPI.
Disable: If OS does
not support ACPI.