Usb/Audio Board - HP Compaq Mini 110 Maintenance And Service Manual

USB/audio board

Description
USB/audio board (includes cable)
For use on the following model numbers only: HP: 110-1000 — 110-1099 and Compaq: 110c-1000
— 110-1099
For use on the following model numbers only: HP: 110-1100 — 110-1199 and Compaq: 110c-1100
— 110-1199
Before removing the USB/audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
6. Remove the following components:
a.
b.
c.
Remove the USB board:
1. Release the ZIF connector (1) to which the USB/audio board cable is connected, and disconnect
the cable (2).
2. Release the USB/audio board from the clip attached to the base enclosure (3), and remove the
USB/audio board (4).
64 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard (see Keyboard on page
Hard drive or solid-state drive (see
Top cover (see Top cover on page
44).
SIM on page
48).
Mass storage devices on page
57).
Spare part number
537614-001
581325-001
45).
54).