Memory Module - HP Compaq Mini 110 Maintenance And Service Manual

Memory module

Description
Memory module (PC2-5300, 533-MHz, DDR2)
512-MB (for use in HP Mini 110 and Compaq Mini 110 only)
1024-MB
2048-MB
Before removing the memory module, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
Remove the memory module:
1. Loosen the 2 Phillips 2.0×3.0 captive screws (1) that secure the memory module compartment
cover to the computer.
2. Swing the cover up and away from the inside of the computer (2), and then remove the cover (3).
3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the device.)
46 Chapter 4 Removal and replacement procedures
Battery on page 44).
Spare part number
537663-001
537664-001
537665-001
SIM on page 45).