HP Mini 1103 Reference Manual
HP Mini 1103 Reference Manual

HP Mini 1103 Reference Manual

Hide thumbs Also See for Mini 1103:
Table of Contents

Advertisement

Quick Links

HP Notebook
Reference Guide
HP Mini 110
Compaq Mini CQ10
HP Mini 1103

Advertisement

Table of Contents
loading

Summary of Contents for HP Mini 1103

  • Page 1 HP Notebook Reference Guide HP Mini 110 Compaq Mini CQ10 HP Mini 1103...
  • Page 2 Sun Microsystems, Inc. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...
  • Page 5: Table Of Contents

    Identifying wireless and network status icons ..............2 Turning wireless devices on or off ..................3 Using the wireless button ..................3 Using HP Wireless Assistant (select models only) to turn wireless devices on or off ........................4 Using HP Connection Manager (select models only) ............4 Using operating system controls ..................
  • Page 6 VGA ........................... 16 DisplayPort ........................17 HDMI ..........................17 Configuring audio for HDMI ................18 Using HP MediaSmart (select models only) ..................19 4 Power management ............................20 Shutting down the computer ....................... 20 Setting power options ......................... 20 Using power-saving states ....................20 Initiating and exiting Sleep ................
  • Page 7 Using Disk Defragmenter .................. 41 Using Disk Cleanup ................... 42 Using HP ProtectSmart Hard Drive Protection in Windows 7 (select models only) ... 42 Identifying HP ProtectSmart Hard Drive Protection status ........ 43 Managing power with a parked hard drive ............43 Using HP ProtectSmart Hard Drive Protection software ........
  • Page 8 Slot load ......................45 Removing an optical disc ....................46 Tray load ......................46 When the disc tray opens normally ..........46 When the disc tray fails to open ............46 Slot load ......................47 Sharing optical drives ......................48 Using RAID (select models only) ......................
  • Page 9 Index ................................... 62...
  • Page 11: Introduction

    Introduction This guide contains general information about HP and Compaq notebook computers, including connecting to a wireless network, multimedia, power management, security, and so on. NOTE: Some of the features described in this guide may not be available on your computer.
  • Page 12: Networking (Select Models Only)

    Wireless (disconnected) Indicates that all wireless devices are off. HP Connection Manager Opens HP Connection Manager, which enables you to create a connection with an HP Mobile Broadband Module (select models only). Wired network (connected) Indicates that one or more network devices are connected to the network.
  • Page 13: Turning Wireless Devices On Or Off

    Windows XP Icon Name Description HP Connection Manager Opens HP Connection Manager, which enables you to create a connection with an HP Mobile Broadband Module (select models only). Wireless (connected) Indicates that one or more wireless devices are on. Wireless (disconnected) Indicates that all wireless devices are off.
  • Page 14: Using Hp Wireless Assistant (Select Models Only) To Turn Wireless Devices On Or Off

    Click Apply. Using HP Connection Manager (select models only) You can use HP Connection Manager to connect to WWANs using the HP Mobile Broadband Module in your computer (select models only). To start Connection Manager, click the HP Connection Manager icon in the notification area, at ▲...
  • Page 15: Using Operating System Controls

    Using operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, manage wireless networks, and diagnose and repair network problems. Windows 7 Select Start > Control Panel > Network and Internet > Network and Sharing Center. ▲...
  • Page 16: Setting Up A New Wlan

    NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. Setting up a new WLAN Required equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) ●...
  • Page 17: Roaming To Another Network

    HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider, which in most cases is a mobile phone network provider.
  • Page 18: Removing A Sim

    Bluetooth and Internet Connection Sharing (ICS) HP does not recommend setting up one computer with Bluetooth as a host and using it as a gateway through which other computers may connect to the Internet. When two or more computers are connected using Bluetooth, and Internet Connection Sharing (ICS) is enabled on one of the computers, the other computers may not be able to connect to the Internet using the Bluetooth network.
  • Page 19: Using Gps (Select Models Only)

    Your computer may be equipped with a Global Positioning System (GPS). GPS satellites deliver location, speed, and direction information to GPS-equipped systems. For more information, refer to the HP Connection Manager or HP Wireless Assistant software Help. Connecting to a wired network...
  • Page 20: Connecting A Country- Or Region-Specific Modem Cable Adapter

    Connecting a country- or region-specific modem cable adapter Telephone jacks vary by country or region. To use the modem and the modem cable outside the country or region in which you purchased the computer, you must obtain a country- or region-specific modem cable adapter.
  • Page 21 internal modem to a location setting that meets the operating standards of the country or region in which you are using the modem. As you add new location settings, they are saved by the computer so that you can switch among settings at any time.
  • Page 22: Connecting To A Local Area Network (Lan) (Select Models Only)

    Select a country or region from the Country/region list. (If you select a country or region that is not supported by the modem, the country/region selection for USA or UK is displayed.) Enter the area code, a carrier code (if necessary), and the number for an outside line (if necessary). Next to Dial using, click Tone or Pulse.
  • Page 23 WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem cable or telephone cable into an RJ-45 (network) jack. Connecting to a wired network...
  • Page 24: Multimedia

    Multimedia Your computer may include the following: ● One or two integrated speakers ● One or two integrated microphones ● Integrated webcam ● Preinstalled multimedia software ● Multimedia buttons or keys Using the media activity controls Depending on your computer model, you may have the following media activity controls that allow you to play, pause, fast forward, or rewind a media file: ●...
  • Page 25: Checking Audio Functions On The Computer

    WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. NOTE: Volume can also be controlled through the operating system and some programs. NOTE: Refer to the Getting Started guide for information on what type of volume controls your computer has.
  • Page 26: Webcam (Select Models Only)

    Start > Help and Support. Using SkyRoom (select models only) HP SkyRoom is a video tool that allows video conferencing and desktop sharing so that participants across the world can collaborate in real time. You can utilize your existing Microsoft Office Communicator or Jabber contact lists or you can create your own list and add contacts manually.
  • Page 27: Displayport

    To connect a VGA display device, connect the device cable to the external monitor port. ▲ NOTE: For product-specific instructions on switching the screen image, refer to your Getting Started guide. DisplayPort The DisplayPort connects a digital display device such as a high-performance monitor or projector. The DisplayPort delivers higher performance than the VGA external monitor port and improves digital connectivity.
  • Page 28: Configuring Audio For Hdmi

    One HDMI device can be connected to the HDMI port on the computer. The information displayed on the computer screen can be simultaneously displayed on the HDMI device. To connect a video or audio device to the HDMI port: Connect one end of the HDMI cable to the HDMI port on the computer. Connect the other end of the cable to the video device, and then refer to the device manufacturer’s instructions for additional information.
  • Page 29: Using Hp Mediasmart (Select Models Only)

    Using HP MediaSmart (select models only) HP MediaSmart turns your computer into a mobile entertainment center. With MediaSmart, you can enjoy music CDs and DVD and Blu-ray Disc (BD) movies. You can also manage and edit your photo collections. MediaSmart includes the following features: ●...
  • Page 30: Power Management

    Power management NOTE: A computer may have a power button or a power switch. The term power button is used throughout this guide to refer to both types of power controls. NOTE: Windows 7 uses Sleep and Windows XP uses Standby. The term Sleep is used throughout this guide to refer to both.
  • Page 31: Initiating And Exiting Sleep

    When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory, letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates Hibernation.
  • Page 32: Using The Power Meter

    To exit Hibernation: Briefly press the power button. ▲ The power lights turn on and your work returns to the screen where you stopped working. NOTE: If you have set a password to be required on wakeup, you must enter your Windows password before your work will return to the screen.
  • Page 33: Setting Password Protection On Wakeup

    Change the settings as needed. To change additional settings, click Change advanced power settings and make your changes. Windows XP Select Start > Control Panel > Performance and Maintenance > Power Options. Select a power scheme from the Power schemes list. Modify the Plugged in and Running on batteries settings as needed.
  • Page 34: Finding Battery Information In Help And Support In Windows 7

    WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Computer battery life varies, depending on power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors.
  • Page 35: Managing Low Battery Levels

    ● Optional docking or expansion device ● Optional power adapter purchased as an accessory from HP Resolving a low battery level when a charged battery is available Turn off the computer or initiate Hibernation. Replace the discharged battery with a charged battery.
  • Page 36: Resolving A Low Battery Level When The Computer Cannot Exit Hibernation

    If the battery is possibly covered by an HP warranty, instructions include a warranty ID. A message refers you to the HP Web site for more information about ordering a replacement battery.
  • Page 37: Using External Ac Power

    To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. Connect the computer to external AC power under any of the following conditions: WARNING! Do not charge the computer battery while you are onboard aircraft.
  • Page 38: Testing An Ac Adapter

    Testing an AC adapter Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power: ● The computer does not turn on. ● The display does not turn on. ● The power lights are off. To test the AC adapter: Shut down the computer.
  • Page 39: External Cards And Devices

    External cards and devices Using Digital Media Slot cards (select models only) Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other computers. To determine the digital card formats that are supported on your computer, refer to the Getting Started guide.
  • Page 40: Using Pc Cards (Select Models Only)

    Either press in on the card (1), and then remove it from the slot (2). – or – Pull the card out of the slot. Using PC Cards (select models only) A PC Card is a credit card–sized accessory designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA).
  • Page 41 CAUTION: To reduce the risk of damage to the connectors: Use minimal force when inserting a PC Card. Do not move or transport the computer when a PC Card is in use. The PC Card slot may contain a protective insert. The insert must be removed before you can insert a PC Card: Press the PC Card eject button (1).
  • Page 42: Removing A Pc Card

    Removing a PC Card CAUTION: To reduce the risk of loss of data or an unresponsive system, stop a PC Card before removing it. Save your information and close all programs associated with the PC Card. Click the remove hardware icon in the notification area, at the far right of the taskbar, and then follow the on-screen instructions.
  • Page 43: Inserting An Expresscard

    Inserting an ExpressCard CAUTION: To prevent damage to the computer and external media cards, do not insert a PC Card into an ExpressCard slot. CAUTION: To reduce the risk of damage to the connectors: Use minimal force when inserting an ExpressCard. Do not move or transport the computer when an ExpressCard is in use.
  • Page 44: Removing An Expresscard

    Removing an ExpressCard CAUTION: To reduce the risk of loss of data or an unresponsive system, use the following procedure to safely remove the ExpressCard. Save your information and close all programs associated with the ExpressCard. Click the remove hardware icon in the notification area, at the far right of the taskbar, and then follow the on-screen instructions.
  • Page 45: Inserting A Smart Card

    Inserting a smart card Hold the card label-side up, and gently slide the card into the smart card reader until the card is seated. Follow the on-screen instructions for logging on to the computer using the smart card PIN. Removing a smart card Grasp the edge of the smart card, and then pull it out of the smart card reader.
  • Page 46: Removing A Usb Device

    Connect the USB cable for the device to the USB port. ▲ You will hear a sound when the device has been detected. NOTE: The first time you connect a USB device, a message in the notification area lets you know that the device is recognized by the computer.
  • Page 47: Connecting A 1394 Device

    Connecting a 1394 device CAUTION: To reduce the risk of damage to a 1394 port connector, use minimal force to connect the device. To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394 ▲...
  • Page 48: Removing An Esata Device

    To connect an eSATA device to the computer, connect the eSATA cable for the device to the ▲ eSATA port. You will hear a sound when the device has been detected. Removing an eSATA device CAUTION: To reduce the risk of damage to an eSATA connector, do not pull on the cable to remove the eSATA device.
  • Page 49: Using Optional External Devices

    Removable external drives expand your options for storing and accessing information. A USB drive can be added by connecting the drive to a USB port on the computer. NOTE: HP external USB optical drives should be connected to the powered USB port on the computer. USB drives include the following types: ●...
  • Page 50: Using The Docking Connector (Select Models Only)

    Using the docking connector (select models only) The docking connector connects the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer. NOTE: The following image may look slightly different than your computer or docking device. Chapter 5 External cards and devices...
  • Page 51: Drives

    Drives Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply. Observe these precautions: ● Before you move a computer that is connected to an external hard drive, initiate Sleep and allow the screen to clear, or properly disconnect the external hard drive.
  • Page 52: Using Disk Cleanup

    ● You move the computer with the display closed while the computer is running on battery power. A short time after the end of one of these events, HP ProtectSmart Hard Drive Protection returns the hard drive to normal operation.
  • Page 53: Identifying Hp Protectsmart Hard Drive Protection Status

    If HP ProtectSmart Hard Drive Protection is enabled, a green check mark is superimposed over the hard drive icon. ● If HP ProtectSmart Hard Drive Protection is disabled, a red X is superimposed over the hard drive icon. ● If the drives are parked, a yellow moon is superimposed over the hard drive icon.
  • Page 54: Using Optical Drives (Select Models Only)

    To open the software and change settings, follow these steps: In Mobility Center, click the hard drive icon to open the HP ProtectSmart Hard Drive Protection window. – or – Select Start > Control Panel > Hardware and Sound > HP ProtectSmart Hard Drive Protection.
  • Page 55: Inserting An Optical Disc

    Inserting an optical disc Tray load Turn on the computer. Press the release button (1) on the drive bezel to release the disc tray. Pull out the tray (2). Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up over the tray spindle.
  • Page 56: Removing An Optical Disc

    Gently slide the disc into the slot load optical drive. Removing an optical disc Tray load There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not. When the disc tray opens normally Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops.
  • Page 57: Slot Load

    Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.
  • Page 58: Sharing Optical Drives

    RAID treats multiple drives as one contiguous drive, either through hardware or software settings. If multiple disks are set up to work together in this fashion, they are referred to as a RAID array. For additional information about RAID, refer to the HP Web site at http://www.hp.com/support. Chapter 6 Drives...
  • Page 59: Security

    Security Protecting the computer Standard security features provided by the Windows® operating system and the non-Windows Setup Utility can protect your personal settings and data from a variety of risks. NOTE: Security solutions are designed to act as deterrents, but they may not deter software attacks or prevent the computer from being mishandled or stolen.
  • Page 60: Setting Passwords In Windows

    Setting passwords in Windows Password Function Administrator password Protects administrator-level access to computer contents. NOTE: This password cannot be used to access Setup Utility contents. User password Protects access to a Windows user account. It also protects access to the computer contents and must be entered when you exit Sleep or Hibernation.
  • Page 61: Managing An Administrator Password

    Managing an administrator password To set, change, or delete this password, follow these steps: Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed, press f10.
  • Page 62: Using Antivirus Software

    Using antivirus software When you use the computer to access e-mail, a network, or the Internet, you potentially expose it to computer viruses. Computer viruses can disable the operating system, programs, or utilities, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and, in most cases, repair any damage they have caused.
  • Page 63: Installing An Optional Security Cable

    Installing an optional security cable NOTE: A security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. NOTE: The security cable slot on your computer may look slightly different from the illustration in this section.
  • Page 64 ● On the upper-right side of the display ● On the left side of the display Depending on your computer model, the fingerprint reader may be oriented horizontally or vertically. Both orientations require that you swipe your finger perpendicular to the metallic sensor. Refer to the Getting Started guide for the location of the fingerprint reader on your computer.
  • Page 65: Setup Utility (Bios)

    Setup Utility (BIOS) Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility includes settings for the types of peripherals installed, the startup sequence of the computer, and the amount of system and extended memory.
  • Page 66: Displaying System Information

    Displaying system information Start Setup Utility. Select the Main menu. System information such as the system time and date, and identification information about the computer is displayed. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding Changes, and then press enter.
  • Page 67: Updating The Bios

    Updated versions of the BIOS may be available on the HP Web site. Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.
  • Page 68 BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed, follow these steps: Windows 7—Open Windows Explorer by selecting Start > Computer. Windows XP—Open Windows Explorer by selecting Start > My Computer. Double-click your hard drive designation.
  • Page 69: Appendix A Traveling With The Computer

    “FRAGILE.” ● If the computer has a wireless device or an HP Mobile Broadband Module installed, such as an 802.11b/g device, a Global System for Mobile Communications (GSM) device, or a General Packet Radio Service (GPRS) device, the use of these devices may be restricted in some environments.
  • Page 70: Appendix B Troubleshooting Resources

    Internet connection. ● Contact HP Customer Support at http://www.hp.com/go/contactHP. NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Choose from the following types of support: ◦...
  • Page 71: Appendix C Electrostatic Discharge

    Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components.
  • Page 72 21 determining version 57 drivers 30 hard drive downloading an update 57 drives external 39 updating 57 external 39 HP ProtectSmart Hard Drive Bluetooth device 2, 8 handling 41 Protection 42 buttons hard 39 HDMI media 14 optical 39...
  • Page 73 14 creating 51 high-definition devices, connecting 17 MediaSmart 19 entering 51 HP Connection Manager 4 modems managing 51 HP MediaSmart 19 connecting a modem cable 9 power-saving states 20 HP Mobile Broadband connecting a modem cable...
  • Page 74 16 software Windows, passwords set in 50 Disk Cleanup 42 wireless Disk Defragmenter 41 action key 3 HP Connection Manager 4 button 3 HP MediaSmart 19 icons 2 HP ProtectSmart Hard Drive protecting 6 Protection 43 set up 6...
  • Page 75 Regulatory, Safety and Environmental Notices User Guide...
  • Page 76 Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
  • Page 77 Modifications ........................2 Cables ..........................2 Declaration of Conformity for products marked with the FCC logo (United States only) ..3 Products with wireless LAN devices or HP Mobile Broadband Modules ......3 Brazil notice ............................4 Canada notices ............................ 4 Avis Canadien ............................
  • Page 78 Voice support ....................16 Power cord notice ..........................16 Japan power cord notice ....................16 DC plug of external HP power supply ................16 Macrovision Corporation notice ......................16 2 Safety notices ..............................17 Heat-related safety warning notice ..................... 17 Potential safety conditions notice .......................
  • Page 79: Regulatory Notices

    Regulatory notices This guide provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted.
  • Page 80: Federal Communications Commission Notice

    Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods.
  • Page 81: Declaration Of Conformity For Products Marked With The Fcc Logo (United States Only)

    To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter.
  • Page 82: Brazil Notice

    Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available (in English only) either within the product documentation or at the following Web site: www.hp.eu/certificates...
  • Page 83: Products With Hp Mobile Broadband Modules

    THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY RADIATION. The HP Mobile Broadband Module in your notebook is a radio transmitter and receiver. The device is designed not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP).
  • Page 84: Ergonomics Notice

    with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the notebook computer, this device meets RF exposure guidelines when the antennas are positioned at a minimum distance from the body.
  • Page 85: Japan Notices

    Japan notices Wireless LAN 802.11b devices Wireless LAN 802.11g devices Bluetooth devices Japan notices...
  • Page 86: Wireless Lan, Wireless Wan, And Bluetooth Certification Markings

    Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. South Korea notice Mexico notice La operación de este equipo está sujeta a las siguientes dos condiciones: (1) este equipo puede que no cause interferencia y (2) este equipo debe aceptar cualquier interferencia, incluyendo interferencia que pueda ser causada por la operación no deseada.
  • Page 87: Taiwan Notices

    Taiwan notices Wireless LAN 802.11a devices Wireless LAN 802.11b devices Vietnam Compliance Marking Notice This marking is for applicable products only. Taiwan notices...
  • Page 88: Airline Travel Notice

    Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. Battery notices WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For information about removing a battery, refer to the user guide included with the product. ENERGY STAR compliance As an ENERGY STAR Partner, Hewlett-Packard Company has followed the EPA’s enhanced product qualification and certification process to ensure that the products marked with the ENERGY STAR...
  • Page 89: Laser Compliance

    Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation: Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide.
  • Page 90: U.s. Modem Statements

    REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible.
  • Page 91 Modem notices...
  • Page 92 Chapter 1 Regulatory notices...
  • Page 93: Canada Modem Statements

    Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5.
  • Page 94: Voice Support

    Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japan power cord notice DC plug of external HP power supply NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms.
  • Page 95: Safety Notices

    WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Headset and earphone volume level notice WARNING! Listening to music at high volume levels and for extended durations can damage one’s...
  • Page 96: Power Cord Notices

    WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. Cleaning the keyboard...
  • Page 97: Environmental Notices

    Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach.
  • Page 98: China Material Content Declarations

    China material content declarations The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Toxic and Hazardous Substances and Elements Hexavalent Polybrominated Lead Mercury Cadmium Chromium Polybrominated diphenyl ethers Part Name (Pb)
  • Page 99 Toxic and Hazardous Substances and Elements Hexavalent Polybrominated Lead Mercury Cadmium Chromium Polybrominated diphenyl ethers Part Name (Pb) (Hg) (Cd) (Cr(VI)) biphenyls (PBB) (PBDE) Liquid crystal display (LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply...
  • Page 100: Japan Material Content Declaration

    July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950. Turkey EEE regulation In Conformity with the EEE regulation EEE Yönetmeliğine Uygundur...
  • Page 101: Ukraine Restriction Of Hazardous Substances

    небезпечних речовин в електричному та електронному обладнані, затвердженого постановою Кабінету Міністрів України від 3 грудня 2008 № 1057. United States mercury disposal This HP product contains the following materials that might require special handling at end-of-life: ● Mercury in the fluorescent lamp in the display LCD Disposal of mercury can be regulated because of environmental considerations.
  • Page 102: Index

    11 Declarations 20 perchlorate material 23 power cords 16, 18 laser safety notice 11 Singapore 8 DC plug of external HP power South Korea 8 supply notice 16 Taiwan 9 Macrovision Corporation notice Declaration of Conformity 3 Thailand WWAN wireless...
  • Page 103 U.S. modem statement 12 Ukraine restriction of hazardous substances notice 23 Vietnam compliance marking notice 9 voice support 16 volume level notice, headset and earphone 17 wireless LAN devices 3 Index...

This manual is also suitable for:

Compaq mini cq10Mini 110

Table of Contents