HP Compaq Mini 110 Maintenance And Service Manual page 86

Description
Display Hinge Kit
(Includes left and right display panel hinges)
Speaker assembly (includes left and right cables)
Display panel
10.1-inch high-definition AntiGlare
10.1-inch standard-definition AntiGlare
10.1-inch WSVGA AntiGlare
Webcam module
Display Cable Kit (includes display/webcam cable and WLAN antennas)
● For use with high-definition and standard-definition display panels only
● For use with WSVGA display panels only
Microphone assembly
WWAN antennas
Display enclosure (includes logo)
For use with black HP models only
For use with pink HP models only
For use with white HP models only
For use with blue HP models only
For use with HP Mini 110 by Studio Tord Boontje models only
For use with Compaq models only
Display Screw Kit (not illustrated)
Before removing the display assembly, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
76 Chapter 4 Removal and replacement procedures
Battery on page 44).
Spare part number
537658-001
537621-001
572405-001
537656-001
579570-001
537660-001
537657-001
579571-001
581323-001
537655-001
537651-001
537654-001
537653-001
591649-001
579576-001
537645-001
538510-001