Last Number Redial List; Opening Lists With The Message Key; Using The Handset As A Room; Monitor - Siemens Dualphone DP45 Operating Manual

Using a handset as a room monitor
Date:
Enter the day/month in 4-digit format.
Time:
Enter the hour/minute for the reminder
call in 4-digit format.
Prompt:
Select the type of signal for the
reminder and press
¤
Save changes (page 22).
Note:
Reminder calls require a time stamp. If you
select a visual signal, then a time stamp is not
required and is automatically set to 00.00.
Deleting anniversaries
¢
s s (Select entry; page 10)
§View§ §Edit§
Press display keys one after
the other.
s
Scroll to the Annivers.: line.
§Edit§ §Delete§ §Save§
Press display keys one after
the other.
Reminder call on an anniversary
A reminder call is signalled on the handset
using the selected ringtone.
§Silence§
Press the display key to stop
the reminder call.

Last number redial list

The last number redial list contains the
ten numbers last dialled with the handset
(max. 32 numbers). If one of the numbers
is in the directory, then the corresponding
name will be displayed.
Manual last number redial
c
Press the key briefly.
s
Select entry.
c
Press the talk key again.
The number is dialled.
When a name is displayed, you can display
the corresponding phone number by
pressing the display key §View§.
12
§OK§
Managing entries in the last number
redial list
c
Press the key briefly.
s
Select entry.
§Options§
Open the menu.
The following functions can be selected
with q:
Display Number
(as in the directory,
page 11)
Copy to Directory
Copy an entry to the directory
(page 10).
Delete Entry
(as in the directory, page 11)
Delete List (as in the directory, page 11)
Opening lists with the message
key
An advisory tone sounds as soon as a new
entry appears on a list. The f key
flashes (it goes off when the key is
pressed). In idle status, the displays shows
an icon for the new message.
If you press the f key, you access the
lists which contain new messages.
Using a handset as a room

monitor

If the room monitor is activated, a
previously stored destination number is
called as soon as a set noise level is
reached. You can store an internal or
external number in your handset as the
destination number.
The room monitor call to an external
number stops after approx. 90 seconds.
The room monitor call to an internal
number (handset) stops after approx.
3 minutes (depending on the base sta-
tion). While the room monitor is activated,
all keys are locked except the end call key.
The handset's speaker is muted.