Barco Galaxy WARP R9040320 Owner's Manual page 106

6. Random Access
Setting up the Shape for Projector 1
1. Use the combination of ENTER and the cursor key ← or → to select right all. (menu 6-114)
2. Push the cursor key ↑ or ↓ to select % of image. (menu 6-115)
3. Push the cursor key ← or → to coincide the right side of the image of Projector 1 with the center of the overlap area. (image 6-47)
4. Use the subpixel selections for fine adjustments.
SHAPE
right all
% of image = 0
%% of image = 0
Menu 6-114
Image 6-47
Basic Shape set up for Projector 1
Setting up the Shape for Projector 2
1. Use the combination of ENTER and the cursor key ← or → to select left all. (menu 6-116)
2. Push the cursor key ↑ or ↓ to select % of image. (menu 6-117)
3. Push the cursor key ← or → to coincide the left side of the image of Projector 2 with the center of the overlap area. (image 6-48)
4. Use the subpixel selections for fine adjustments.
SHAPE
left all
% of image = 0
%% of image = 0
Menu 6-116
102
SHAPE
right all
% of image = 0
%% of image = 0
Menu 6-115
SHAPE
left all
% of image = 0
%% of image = 0
Menu 6-117
R5976570 BARCO GALAXY WARP™ 25/03/2004