Fishtrack - Lowrance X-28 Installation And Operation Instructions Manual

The microcomputer is sophisticated, but it can be fooled. It can't distinguish
between fish and other suspended objects such as turtles, submerged
floats, air bubbles, etc. Individual tree limbs extending outwards from a
group of limbs are the hardest objects for the Fish ID feature to distinguish
from fish. You may see Fish ID symbols on
the screen when, in fact, there are no fish.
Practice with the unit when the Fish ID feature
is on and off to become more familiar with
Fish ID. To turn this feature on, press a menu
key until the Fish ID feature's menu appears
as shown at right. Now press the up arrow
key. This turns the feature on. To turn it off,
repeat the above steps, but press the down
arrow key instead.
The Fish ID feature can't be used when the X-
28 is in the manual mode. If you turn the
automatic feature off, the Fish ID feature will
automatically be turned off, also.

FISHTRACK™

The X-28 automatically displays the depth of a target when the Fish ID
feature places a fish symbol on the screen as shown below left. This
feature is automatically enabled when the X-28 is turned on. To turn it off
or on again, press a menu key repeatedly until the Fish Track menu
appears as shown below. Now press the down arrow key to turn it off.
Remember, Fish ID must be on in order to use the Fish Track feature.
CHART SPEED
The rate echoes scroll across the screen is called the chart speed. It's
11