Fishtrack - Lowrance X67C Installation And Operation Instructions Manual

To turn the Fish I.D. feature on:
1. From the Sonar Page, press
2. Press ↓ to
F
To turn off Fish I.D., repeat these instructions.
FishTrack
The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. This lets you accurately gauge the depth of tar-
gets. This feature is available only when the Fish I.D. feature is on. The
default setting for FishTrack is off.
To turn on FishTrack:
(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press
2. Press ↓ to
F
To turn off FishTrack, repeat these instructions. Turning off FishTrack
in this manner will not turn off Fish I.D. symbols.
Sonar Features menu with Fish I.D. Depths selected. When the check
box to the left is checked, the feature is on. At right, Sonar Page show-
ing Fish I.D. symbols and FishTrack depths turned on.
HyperScroll
See the entry on Ping Speed, which controls the HyperScroll feature.
Noise Rejection
See the entry on Advanced Signal Processing in this section.
|
ID S
ISH YMBOLS
|
ID D ENT
ISH EPTHS
|↓ to
MENU
| |
ENT EXIT EXIT
|↓ to
MENU
| |
EXIT EXIT
Symbols with
FishTrack depths
50
S F
ONAR EATURES
.
S F
ONAR EATURES
.
| .
ENT
| .
ENT