Table of Contents
Advertisement
SC-411RD-10 14
REMOTE SIREN AMPLIFIER
WITH LIGHT CONTROL
OFF
1
2
S1
S2
INSTALLATION AND OPERATING
Carson is a trademark of Carson Manufacturing Company, Inc.
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877
www.carsonsirens.com
YELP
WAIL
3
STBY
HORN
SC SC SC SC- - - - 411
S3
S4
INSTRUCTIONS
Fax: (317) 254-2667
PHSR
CYCLE
RADIO
MANUAL
411
411
411
Elite Force
S5
CARSON
PA VOL
OUT/DIM
S6
WARNING: WEAR HEARING PROTECTION REF. OSHA 1910.95
Advertisement
Table of Contents
Related Manuals for Carson SC-411RD-10
Summary of Contents for Carson SC-411RD-10
- Page 1 INSTALLATION AND OPERATING INSTRUCTIONS Carson is a trademark of Carson Manufacturing Company, Inc. Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
-
Page 2: Table Of Contents
Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice. Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. -
Page 3: General Description
SC-411RD-10 Installation and Operating Instructions Page 3 of 12 GENERAL DESCRIPTION The SC-411RD Remote Light Control/Siren is a premium unit designed for dual 100W speaker use. The pri- mary operating modes are Radio, Cycler, Standby, Yelp, Wail, and Phaser. A Noise Canceling PA Override and push-button Horn Override are available in all modes except Radio. -
Page 4: Installation
Page 4 of 12 Installation and Operating Instructions SC-411RD-10 INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. -
Page 5: Amplifier Wiring Diagram
SC-411RD-10 Installation and Operating Instructions Page 5 of 12 AMPLIFIER WIRING DIAGRAM Aux switch 3 output Aux switch 4 output Aux switch 2 output Aux switch 5 output Aux switch 1 output Aux switch 6 output Right arrow stick Lever switch 1 output... -
Page 6: Option Settings
Page 6 of 12 Installation and Operating Instructions SC-411RD-10 OPTION SETTINGS Enter/Exit Program Mode Turn unit on with POWER input. Enter the program mode by pressing and holding OUT/DIM, S1 and S2 for 3 seconds. The unit will beep 3 times and the backlighting will begin flashing to indicate that the unit is in program mode. It will continue to flash until program mode is exited by pressing and holding OUT/DIM for 3 seconds, saving the settings—the unit will emit a long beep. -
Page 7: Option Set 1
SC-411RD-10 Installation and Operating Instructions Page 7 of 12 Option Set 1 S1 (CUTOUT Input), S2 (SIRCTRL Input), S3 (LITCTRL Input) - These inputs are Press Lever Switch = OFF Shows blinking normally activated by a 12V input (ON). 0↓... -
Page 8: Operation
Page 8 of 12 Installation and Operating Instructions SC-411RD-10 OPERATION This unit is designed for easy operation under the stress associated with high-speed pursuit. Most siren func- tions are accessible with one simple motion. Certain operational features or controlled by option settings and/or installation connections. -
Page 9: Light System Controls
SC-411RD-10 Installation and Operating Instructions Page 9 of 12 CARSON YELP PHSR WAIL CYCLE STBY RADIO PA VOL HORN MANUAL OUT/DIM SC SC SC- - - - 411 Elite Force WARNING: WEAR HEARING PROTECTION REF. OSHA 1910.95 LIGHT SYSTEM CONTROLS A 4-position lever switch provides control of primary lighting functions. -
Page 10: Service
Do the aux switch indicators light? not working Loose aux switch output connection Is the corresponding fuse blown? PARTS The following parts are available from Carson Manufacturing Company, Inc.: Part Description ED1943 Kit, Control Head Mounting (2-brackets, screws and lockwashers) ED1944 Kit, Lever Switch Replacement (Includes mounting screws &... -
Page 11: Return
Page 11 of 12 RETURN If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e- mail at service@carson-mfg.com... -
Page 12: Installation Configuration Record
Page 12 of 12 Installation and Operating Instructions SC-411RD-10 INSTALLATION CONFIGURATION RECORD Terminal AWG Color Connected to Terminal AWG Color Connected to POS (2) GND (2) POWER RADIO (2) BACKLIT LITCTRL SIRCTRL CUTOUT SPKR1 SPKR2 RGT-A SPKRC LFT-A VIDEO CTR-A S1—S6 Operation:...
Need help?
Do you have a question about the SC-411RD-10 and is the answer not in the manual?
Questions and answers