Table of Contents
Advertisement
Quick Links
Carson Manufacturing Co., Inc.
Phone: (888) 577-6877
SIREN AMPLIFIER
STANDBY
Y
E
L
P
SA-365
INSTALLATION AND OPERATING
Carson is a trademark of Carson Manufacturing Company, Inc.
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
5451 North Rural Street
Indianapolis, IN 46220
www.carsonsirens.com
SA-365-10
W
OUTPUT
A
I
L
INSTRUCTIONS
Fax: (317) 254-2667
M
A
N
/
P
H
S
R
H
O
R
N
Advertisement
Table of Contents
Related Manuals for Carson SA-365-10
Summary of Contents for Carson SA-365-10
- Page 1 INSTALLATION AND OPERATING INSTRUCTIONS Carson is a trademark of Carson Manufacturing Company, Inc. Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
-
Page 2: Table Of Contents
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. -
Page 3: Installation
Inspect contents for shipping damage. If found alert carrier immediately. Contact supplier immediately if any items are missing. Contents of box should include the following items: Qty Item Amplifier Unit (SA-365-10 14) Bracket, ‘U’ Dash Mount (CP5037) Bolts, ‘U’ Mounting Bracket (CP3966) Connector, 6-P Terminal Block Plug (CP4688-06) -
Page 4: Option Switches
Page 4 of 8 SA-365-10 Installation Instructions OPTION SWITCHES An 8-position DIP switch on the remote amplifier may be changed to select various options. Option Switches On Side Option Switches Default Setting Shown (Switches OFF) SW-1 Auxiliary Input Polarity - The auxiliary input is normally activated with positive, turn this switch ON for negative activation. -
Page 5: Mounting
SA-365-10 Installation Instructions Page 5 of 8 MOUNTING The mounting bracket supplied can be installed above or below the unit. Choose a mounting location convenient to the operator and away from any air bag deployment areas. Inspect behind mounting area for clearance. Assure adequate ventilation to prevent overheating. Consider wire routing and access to connections, as well as microphone bracket placement. -
Page 6: Operation
Page 6 of 8 SA-365-10 Installation Instructions OPERATION Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines) POWER ON/OFF The unit is turned on/off automatically (instant on) with the siren or auxiliary input controls. -
Page 7: Service
Tone disabled Check option switch settings. not working Remote switches wired incorrectly Are the correct switch terminals wired? PARTS and ACCESSORIES The following parts and accessories are available from Carson Manufacturing Company, Inc.: Part Description CP5035 Cover (not including chassis) CP4990-150... -
Page 8: Returns
During this warranty period the obligation of Carson Manufacturing is limited to repairing or replacing, as Carson Manufacturing may elect, any part or parts of such product which after examination by Carson Manufacturing is determined to be defective in material and/or work- manship.
Need help?
Do you have a question about the SA-365-10 and is the answer not in the manual?
Questions and answers