Table of Contents
Advertisement
Quick Links
SIREN AMPLIFIER
INSTALLATION AND OPERATING
Carson is a trademark of Carson Manufacturing Company, Inc.
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877
www.carsonsirens.com
SA-400-10
RADIO
HORN
MAN
WAIL
O
YELP
F
F
PHASER
INSTRUCTIONS
Fax: (317) 254-2667
SIREN
SA-400
O
N
PA
VOL
Advertisement
Table of Contents
Related Manuals for Carson SA-400-10
Summary of Contents for Carson SA-400-10
- Page 1 INSTALLATION AND OPERATING INSTRUCTIONS Carson is a trademark of Carson Manufacturing Company, Inc. Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
-
Page 2: Table Of Contents
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not lim- ited to, the implied warranties of merchantability and fitness for a particular purpose. -
Page 3: General Description
SA-400-10 Installation and Operating Instructions Page 3 of 8 GENERAL DESCRIPTION The SA400 Siren Amplifier is a premium unit designed for single or dual 100W speaker use. A 6- position rotary switch controls the primary operating modes of Phaser, Yelp, Wail, Manual, Horn and Radio. -
Page 4: Unpacking
Page 4 of 8 SA-400-10 Installation and Operating Instructions Wiring - Use wiring capable of handling the current required. Make sure all connections are tight. Route wiring to prevent wear, overheating and interference with air bag deployment. Install and check all wiring before connection to vehicle battery. -
Page 5: Electrical Connections
SA-400-10 Installation and Operating Instructions Page 5 of 8 ELECTRICAL CONNECTIONS #14 AWG RED Use both leads Electrical connections to the unit are made using Extend with #12 the wiring harness supplied. If the unit needs service the connector can be easily removed without unwiring the harness. -
Page 6: Operation
Page 6 of 8 SA-400-10 Installation and Operating Instructions OPERATION Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. -
Page 7: Service
Is the P_I option switch turned on? Phaser not working Horn not working Horn disabled Is the H_I option switch turned on? PARTS The following parts are available from Carson Manufacturing Company, Inc.: Part Description CP3966 Bolt, mounting, 1/4-20 x 3/8" (2 required) -
Page 8: Return
During this warranty period the obligation of Carson Manufacturing is limited to repairing or replacing, as Carson Manufacturing may elect, any part or parts of such product which after examination by Carson Manufacturing is determined to be defective in mate- rial and/or workmanship.
Need help?
Do you have a question about the SA-400-10 and is the answer not in the manual?
Questions and answers