Advertisement
SA-450-80 WITH PA VOLUME ON SIDE
SA-450-80 PG (Positive GND)
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
TB0328B
CARSON MANUFACTURING CO., INC.
5451 NORTH RURAL STREET
INDIANAPOLIS, IN 46220
(888) 577 6877
TECHNICAL BULLETIN
MAN
MAN
WAIL
WAIL
HORN
HORN
RADIO
RADIO
INSTALLATION AND
OPERATING MANUAL
(OLD VERSION)
SA-450-80 14V
Carson
MANUFACTURING COMPANY, INC.
www.carsonsirens.com
SIREN
SIREN
YELP
YELP
OFF
OFF
PHASER
PHASER
ON
ON
Page 1 of 7
POWER
POWER
SA450
SA450
10/18/03
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Carson SA-450-80
Summary of Contents for Carson SA-450-80
- Page 1 RADIO INSTALLATION AND OPERATING MANUAL SA-450-80 WITH PA VOLUME ON SIDE SA-450-80 PG (Positive GND) Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
- Page 2 Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
-
Page 3: Installation
Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. SAFETY PRECAUTIONS For the safety of the installer, vehicle operator, passengers and the community please observe the following safety precautions. -
Page 4: Wiring Harness Conne C Tions
ELECTRICAL CONNECTIONS Disconnect vehicle battery before making any electrical connections. Electrical connections to the amplifier are made using the wiring harness supplied. If the amplifier needs service the connector can be easily removed without unwiring the harness. The power supply for the amplifier must be capable of delivering peak currents up to 50 amps for adequate short circuit protection and reliable operation. -
Page 5: Operation
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines) HORN HORN RADIO RADIO... - Page 6 Radio volume too low If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e-mail at service@carsonsirens.com...
- Page 7 Connector, power (AMP #640584-1) CP3675-1 Cover CP4852 Knob, rotary function switch CP3690 Label, front panel for SA-450-80 (some sirens had laser etched panel instead) CP3691 Microphone (Replace with CP3570 microphone) CP3633 Microphone clip with mounting screws L111132MV02Q Switch, pushbutton siren (C&K # L111132MV02QA)
Need help?
Do you have a question about the SA-450-80 and is the answer not in the manual?
Questions and answers