Installation - Zanussi ZCV662 User Manual

Problem
The residual heat indicator does
not come on
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to the Safety chapters.
Technical data
Dimensions
Height
Width
Depth
Top oven capacity
Main oven capacity
Location of the appliance
You can install your freestanding appliance
with cabinets on one or two sides and in the
corner.
www.zanussi.com
Possible cause
The cooking zone is not hot be-
cause it operated only for a short
time.
894-912 mm
600 mm
600 mm
37 l
74 l
If the cooking zone must be hot,
speak to the Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
.........................................
.........................................
.........................................
Minimum distances
Dimension
A
B
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
Remedy
B
A
A
mm
2
685
19