Zanussi ZCV662 User Manual page 17

• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft cloth
with warm water and cleaning agent) after
each use and let them dry.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It can
destroy nonstick coating!
Stainless steel or aluminium appli-
ances:
Clean the oven door with a wet sponge only.
Dry it with a soft cloth.
Do not use steel wool, acids or abrasive mate-
rials as they can damage the oven surface.
Clean the oven control panel with the same
precautions
Catalytic walls (selected models only)
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects on
walls while the oven operates.
To support this self-cleaning process
heat the oven without any food regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Set the Conventional Cooking function.
• Set the oven temperature to 250 °C and let
oven operate for 1 hour.
• Clean the oven cavity with a soft and damp
sponge.
Warning! Do not attempt to clean
catalytic surface with oven sprays,
abrasive cleaners, soap or other cleaning
agents. This will damage the catalytic surface.
Discolouration of the catalytic surface has
no effect on catalytic properties.
Cleaning the top oven glass panels
The door glass on your product can be
different in type and shape from what you
see in diagrams. The number of glasses can
be different.
Removing the glass:
1. Open the door.
www.zanussi.com
2. Push the door trim at both sides to release
the clips. Refer to the picture.
3. Remove the glass panels.
1
To replace the glass obey the procedure
in opposite sequence.
Cleaning the oven door
The door glass on your product can be
different in type and shape from what you
see in diagrams. The number of glasses can
be different.
Removing the glass:
1. Push the door trim at one side to remove it.
Refer to the picture.
2. Pull up the trim.
3. Remove the glass panels.
1
2
17