Guided Installation - THOMSON ST516v6 Installation And Setup Manual

2.2.1

Guided Installation

Introduction
On the CD, a Quick-Install Wizard is provided that will guide you through the first installation and setup of
your Thomson Gateway.
The Quick-Install Wizard will:
>
Provide important safety and regulatory information.
>
Show you how to make the necessary connections to your Thomson Gateway.
>
Show you how to turn on your device.
>
Prepare you to smoothly run the Thomson Gateway Home Install Wizard.
The subsequent Home Install Wizard will then prepare your Thomson Gateway and your local computer(s) to
connect to the Internet.
The Home Install Wizard will:
>
Guide you through connecting your computer(s) to your Thomson Gateway.
>
Prepare the Thomson Gateway to connect to the Internet.
!
You need administrative rights to run the applications on the Setup CD on a Microsoft Windows
2000 or XP operating system, or Mac OS X computer.
Connecting the cables: wait!
Do not plug in any cables until you are prompted to do so by the Quick-Install Wizard and/or the Home Install
Wizard.
Starting the CD for the first time
To start the Thomson Gateway Setup:
1 Insert the Setup CD into your computer's CD-ROM or DVD-ROM drive.
Microsoft Windows: The CD should autostart.
!
If not, see
Mac OS X: Double-click Menu in the window with the content of the CD.
2 Select the language of your choice and click OK.
3 The procedure continues with the Quick-Install Wizard.
Proceed with " Quick-Install Wizard" on page
Quick-Install Wizard
The Quick-Install Wizard guides you through the first setup of your Thomson Gateway.
1 On the Welcome page, click Next to continue.
!
If you ran the CD on this computer before, the Quick-Install Wizard is not shown; the CD menu
appears instead (see
8
"The Thomson Gateway CD does not start automatically" on page
8.
"2.3 The Setup CD" on page 17
Basic Installation
for more information).
E-DOC-CTC-20060911-0017 v2.0
Chapter 2
31.