THOMSON ST516v6 Installation And Setup Manual page 17

Chapter 2
Basic Installation
3 Make the following connection:
Connect the yellow RJ-45 Ethernet cable to the yellow Ethernet port on your Thomson Gateway and
the other end to the computer's Ethernet port.
4 Once the hardware is installed and connected to the Thomson Gateway, the procedure continues with
configuring your Internet connection.
i
If the wizard does not detect a connection, an error message will be displayed. Refer to
wizard does not detect a connection" on page
Proceed with
E-DOC-CTC-20060911-0017 v2.0
" Configuring the Internet connection" on page
31.
12.
" The
11