Guided Installation - THOMSON SpeedTouch 585 Installation And Setup Manual

Chapter 2
Basic Installation

2.2.1 Guided Installation

Introduction
Connecting the cables:
Starting the CD for the
first time
8
On the CD, a Quick-Install Wizard is provided that will guide you through the first
installation and setup of your SpeedTouch™.
The Quick-Install Wizard will:
Provide important safety and regulatory information.
Show you how to make the necessary connections to your SpeedTouch™.
Show you how to turn on your device.
Prepare you to smoothly run the SpeedTouch™ Home Install Wizard.
The subsequent SpeedTouch™ Home Install Wizard will then prepare your
SpeedTouch™ and your local computer(s) to connect to the Internet.
The Home Install Wizard will:
Guide you through connecting your computer(s) to your SpeedTouch™.
Prepare the SpeedTouch™ to connect to the Internet.
You need administrative rights to run the applications on the Setup CD on a
!
Microsoft Windows 2000 or XP operating system, or Mac OS X computer.
Do not plug in any cables until you are prompted to do so by the SpeedTouch™
wait! Quick-Install Wizard and/or the SpeedTouch™ Home Install Wizard.
To start the SpeedTouch™ Setup CD Menu:
1
Insert the Setup CD into your computer's CD-ROM or DVD-ROM drive.
Microsoft Windows: The CD should autostart.
Mac OS X: Double-click Menu in the window with the content of the CD.
2
Select the language of your choice and click OK.
3
The procedure continues with the SpeedTouch™ Quick-Install Wizard.
Proceed with
If not, see "The SpeedTouch™ CD does not start automatically"
on page 33.
" Quick-Install Wizard" on page 9.
E-DOC-CTC-20051017-0093 v1.0