Power Function; Timer; Count Down Timer; Minute Minder - John Lewis JLBIIH804 User Manual

Power function

The Power function makes more power
available to the induction cooking zones. The
Power function can be activated for a limited
period of time ( see Technical Information
chapter). After that, the induction cooking zone
automatically sets back to highest heat setting.
To activate, touch
deactivate, touch
Power management
The power management divides the power
between two cooking zones in a pair (see the
illustration). The power function increases the
power to the maximum level for one cooking
zone in the pair. The power in the second
cooking zone automatically decreases. The heat
setting display for the reduced zone changes
between two levels.

Timer

Count Down Timer

Use the Count Down Timer to set how long the
cooking zone operates for only this one time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after you
set the timer.
Hob user manual
, comes on. To
or .
• To set the cooking zone: touch
and again until the indicator of a necessary
cooking zone comes on.
• To activate or change the Timer: touch
or of the timer to set the time (
99
minutes). When the indicator of the
cooking zone starts to flash slow, the time
counts down.
• To deactivate the Timer: set the cooking
zone with and touch
Timer. The remaining time counts back to
00
. The indicator of the cooking zone goes
out.
• To see the remaining time: set the
cooking zone with
cooking zone starts to flash quickly. The
display shows the remaining time.
When the time comes to an end, the sound
00
operates and flashes. The cooking zone
deactivates.
• To stop the sound: touch

Minute Minder

You can use the Timer as a Minute Minder
while the cooking zones do not operate. Touch
. Touch or
time comes to an end, the sound operates and
00
flashes
• To stop the sound: touch

Lock

When the cooking zones operate, you can lock
the control panel, but not
accidental change of the heat setting.
First set the heat setting.
To start this function touch
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
that you set before comes on.
When you stop the appliance, you also stop this
function.
again
00
to deactivate the
. The indicator of the
to set the time. When the
. It prevents an
. The symbol
. The heat setting
-
11