How To Turn Off All The Burners At Once; Burner Safety Cut-Off Function; Hob Safety Cut-Off Function; Protection Against Overheating - John Lewis JLBIGGH 704 Instruction Manual

"
Ho How to turn off all the burners Ho w to turn off all the burners w to turn off all the burners w to turn off all the burners
Ho Ho w to turn off all the burners
at once at once at once
at once at once
In case of unexpected safety hazard
children hazard, etc.), you can immediately turn off all the
hob burners at once by touching
.
"

Burner safety cut-off function

Burner safety cut-off function Burner safety cut-off function Burner safety cut-off function Burner safety cut-off function
If you leave one or more burners lit and unattended for a
long time (that is, you do not touch any control for at least 4
hours), each lit burner is automatically turned off and a
device is set on it.
If you select the burner that does not work with the
Timer Control
cooking time display.
Caution! When the safety device is set on a burner,
the burner controls cannot be operated for about 60
seconds.
After 60 seconds, you can remove the safety device on the
burner by touching both the Increasing Controls
the Decreasing Control
Then, follow the instructions given in the paragraph "How to
light a burner".
"

Hob safety cut-off function

Hob safety cut-off function
Hob safety cut-off function Hob safety cut-off function Hob safety cut-off function
If no burner is on but the hob is activated (the red indicator
above the touch control
switched off if no control is operated within 30 minutes.
"

Protection against overheating

Protection against overheating Protection against overheating Protection against overheating Protection against overheating
If the hob is used intensively, e.g. several burners at maximum
level for a long time, a temperature sensor detects possible
overheating and automatically adjusts all the lit burners to
minimum.
If the hob temperature keeps rising although the flame level
has been reduced, all the lit burners are automatically turned
off and a safety device is set on all the four burners.
If you select all the burners with the Timer Control
(one at a time) Code number 9
cooking time display.
Caution! When the safety device is set on all the
burners, their controls cannot be operated for about
60 seconds.
After the 60 seconds, you can reactivate all the burners by
touching the Increasing Control
of one of the four burners at the same time.
Once the safety device has been removed, wait until the hob
has cooled down before using it again.
(spilling of liquids,
the main ON/OFF Control
Code number 10 flashes in the Code number 10 Code number 10
Code number 10 Code number 10
at the same time.
is on), the hob is automatically
Code number 9 Code number 9
Code number 9 flashes in the Code number 9
and the Decreasing Control
safety
and
19