Table of Contents
Advertisement
Daily use
Warning! Refer to Safety
chapters.
Activating and deactivating
Touch
for 1 second to activate or deactivate
the hob.
Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean
the control panel.
• the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
• you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or change
the heat setting. After some time
and the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
, 1 - 2
3 - 4
10
comes on
The hob deactivates
after
6 hours
5 hours
Heat setting
5
6 - 9
Selecting the cooking zone
To set the cooking zone touch the sensor field
related to this zone. The display highlights
the heat setting indication (
The heat setting
Set the cooking zone.
Touch
to increase the heat setting. Touch
to decrease the heat setting. Touch
at the same time to deactivate the cooking zone.
Power function
This function makes more power available to
the induction cooking zones. The function can
be activated for the induction cooking zone only
for a limited period of time. After this time the
induction cooking zone automatically sets back
to the highest heat setting.
Refer to "Technical information"
chapter.
To activate the function for a cooking
zone: first set the cooking zone and than set
the maximum heat setting. Touch
comes on.
To deactivate the function: touch
The hob deactivates
after
4 hours
1.5 hour
).
and
until
.
Hob User Manual
Advertisement
Table of Contents
