You MUST read them carefully before use or installation by a qualified person. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance.
Description of the Appliance Cooking surface layout Single cooking zone Single cooking zone 1200W 1800W Single cooking zone Control panel Single cooking zone 2300W 1200W...
Installation Technical Data Appliance dimensions Width Depth Height Worktop cut-out dimensions Width Depth Electrical Connection This hob must be earthed. Electrical Requirements Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regula- tions. For your own safety this should be undertaken by a qualified electrician, e.g.
Page 6
Building In The hob must be installed according to the in- structions supplied by qualified and compe- tent personnel to the relevant National Standards. Building In • The dimensions of the cut-out section and recess re- quired must be as shown in the relevant diagrams. •...
The Control Panel Touch Control sensor fields The appliance is operated using the Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays. Touch the sensor fields from above, without covering other sensor fields. Sensor field On / Off Increase settings Reduce settings...
Residual heat indicator Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indica- Residual heat can be used for melting and keeping food warm. Switching the appliance on and off Switch on Touch...
Using the child safety device The child safety device prevents unintentional use of the ap- pliance. Setting the child safety device Step Switch on appliance (Do not set a heat setting) Touch of the front right cooking zone and the same time Touch of the front right cooking zone Appliance switches off.
Safety cut-out Cooking surface • If after switching on the appliance a heat setting is not set for a cooking zone within approx. 10 seconds, the appli- ance automatically switches itself off. • If one or more sensor fields are touched for longer than approx.
When the hob is first installed Remove all packaging, both inside and outside the hob including the advertising labels and any protec- tive film, before using the hob. When a cooking zone is switched on, it may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not impair either the func- tion or the life of the appliance.
Hints and Tips on cooking and frying Cookware • You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possi- ble. • Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolourations on the ceramic glass surface which can be impossible to remove.
Cooking chart This chart is intended as a guide only. It may be nec- essary to increase or decrease the temperature to suit your individual requirements. Only experience will enable you to determine the correct setting for your personal requirements. Heat set- Cooking ting...
*Scrapers and cleaners for glass ceramic and stainless steel can be pur- chased from your local John Lewis branch. Remove stubborn residues with a cleaner for glass ceramic or stainless steel. Scratches or dark stains on the glass ceramic that cannot be removed do not affect the functioning of the appliance.
Something not working If the hob is not working correctly, please carry out the following checks, before contacting your local Service Force repair agent. In the event of any other fault codes that arise, disconnect the appliance from the electrical supply for a few seconds (take out the fuse from the housing wiring system).
Repairs - After Sales Service If your hob is not performing satisfactorily; consult the fault finding guide within this instruction book (Something not working). In the event of a fault occurring which you cannot resolve yourself from advice given within this instruction manual your first step is to contact our extended warranty administrators on 0870 0107887 who will give you details for your local Service Force.
Need help?
Do you have a question about the JLBICH602 and is the answer not in the manual?
Questions and answers
Is this hob safe for someone with a pacemaker