Daily Use; Activation And Deactivation; Automatic Switch Off; The Heat Setting - John Lewis JLBIIH804 User Manual

Daily use

Activation and deactivation

Touch for 1 second to activate or deactivate
the appliance.

Automatic Switch Off

The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). An acoustic signal sounds
some time and the appliance deactivates.
Remove the object or clean the control panel.
• The appliance becomes too hot (e.g. when, a
saucepan boils dry). Before you use the
appliance again, the cooking zone must be
cool.
• You use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates. See
below.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
, - — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
10

The heat setting

Touch
to decrease the heat setting. The display shows
the heat setting. Touch
time to deactivate the cooking zone.

Automatic Heat Up

).
11
10
9
8
7
6
5
4
3
2
1
0
You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up
function. This function sets the highest heat
setting for some time (see the illustration), and
then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1.
Touch
display.
2.
Immediately touch
comes on in the display.
3.
Immediately touch
the necessary heat setting comes on. After
3 seconds
To stop the function touch
to increase the heat setting. Touch
and
1 2 3 4 5
. The symbol
. The symbol
again and again until
comes on in the display.
at the same
6 7 8 9
comes on in the
.
Hob user manual