Switching The Power Function On And Off; Using The Timer; Locking / Unlocking The Control Panel - John Lewis JLBIIH804 Instruction Manual

highest heat setting for some time (see the
graphic), and then decreases to the necessary
heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch .
2. Immediately touch
display.
3. Immediately touch
the necessary heat setting comes on. After
3 seconds comes on in the display.
To stop the function touch
Switching the Power
function on and off
The Power function makes more power
available to the induction cooking zones. The
Power function is activated for 10 minutes at
most. After that the induction cooking zone
automatically switches back to the highest
heat setting. To switch on, touch
comes on. To switch off, touch
Power management
The power management divides the power
between two cooking zones in a pair (see the
figure). The power function increases the
power to the maximum level for one cooking
zone in the pair and automatically decreases
in the second cooking zone to a lower power
comes on in the display.
. comes on in the
again and again until
.
,
or
level. The display for the reduced zone
alternates.

Using the Timer

Use the timer to set how long the cooking
zone operates for one cooking session.
Set the timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• Selection of the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• Starting or changing the timer: touch
or
99
- minutes). When the indicator of the
cooking zone flashes slower, the time
counts down.
• Stopping the timer: select the cooking
zone with
timer. The remaining time counts
backwards to
.
cooking zone goes out.
• Checking the remaining time: select
the cooking zone with
the cooking zone flashes faster. Display
shows the remaining time.
When the time elapses, the sound operates
00
and flashes. The cooking zone switches
off.
• Stopping the sound: touch
You can use the timer as a minute minder
while cooking zones do not operate. Touch
. Touch
the time elapses, the sound operates and
00
flashes
Locking / unlocking the
control panel
You can lock the control panel. It prevents an
accidental change of the heat setting.
11
of the timer to set the time (
and touch to switch off the
00
. The indicator of the
. The indicator of
or to select the time. When
00